Expert Answers about Ford F-250 Super Duty
- Ladder Rack Recommendation for a 2021 Ford F-250 6-1/2 Foot Bed
- For a standard ladder rack on your 2021 Ford F-250 Super Duty with the short bed I recommend going with the Thule TracRac TracONE which comes in Matte Black # TH27000XTB or Silver # TH27000XT. The TracONE is a tried and true ladder rack that has an aluminum construction and an 800 lb weight rating so it is durable and will hold up really well against the elements.
The premium option is the Thule TracRac SR # TH43003XT-785 which can slide back and forth for crossbar spread adjustability...
view full answer... - Do Sensors of TireMinder i10 part # TM89FR Throw Off Wheel Balance
- The sensors of the TireMinder i10 part # TM89FR that you referenced are not heavy enough to throw off the balance of the wheel/tire.
view full answer... - Availability of 16 inch Trailer Wheel with 6 inch Width and 6 Lug Bolt Pattern
- Based on what you mentioned what you are looking for is a 16 inch diameter trailer wheel that is 6 inches wide and has a 6 on 5-1/2 inch bolt pattern like the # AM20741 that you referenced. This has a weight capacity of 3,050 lbs but if you needed higher we also have the part # AM20742 which is same wheel mostly but with weight capacity of 3,520 lbs.
view full answer... - How Can The Demco Recon 5th Wheel Hitch Work With My 2022 Ford F-250 With OEM Pucks?
- For your 2022 Ford F-250, to be able to use the Demco Recon 5th Wheel Trailer Hitch # DM8550043 with your factory pucks, you're actually going to want to use the:
-Demco Recon 5th Wheel Trailer Hitch # DM8550045-5W instead.
This is the exact same hitch as # DM8550043, but is designed to be used with your factory pucks.
The Demco Recon # DM8550045-5W has a maximum towing capacity of 21,000lbs, a vertical load limit of 4,000lbs, and has 3 height settings that can be adjusted to fit any...
view full answer... - What Screen Size Is On a 2020 Ford F-250 Super Duty 8" or 7"?
- Your 2020 Ford F-250 was only available with either a 4.2", or 8" in dash screen. This measurement is taken diagonally and often the visible area is often covered slightly around the edges with a trim kit. This may explain why there is some confusion on the screen size for adding a Custom Third Brake Light Camera for 8" Factory Monitor # 3460001.
view full answer... - SuperSprings SuperSway Stops Confirmed to Fit a 2020 Ford F-250 Super Duty
- For your 2020 Ford F-250 Super Duty the SuperSprings SuperSway Stops # SS65GR are confirmed to fit as long as you have the factory top overload leaf springs.
The SuperSprings SuperSway Stops # SS75GR are for a intended to fit many heavy duty Ram trucks.
view full answer... - Compatibility Of B&W Turnover Ball and Firestone Ride-Rite Extreme On a 2020 Ford F-250 Short Bed
- You can install the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F95FV before you install the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1116 on your 2020 Ford F-250 FX4. Since both these use different mounting holes and do not share the same mounts they can be installed in any order.
I do recommend covering your airbags when you do install the Turnoverball later as you will be drilling holes through the bed and do not want to get any metal shavings trapped...
view full answer... - Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
- I reached out to Dexter and found that your axle is a 10,000 lb general duty axle. The correct inner bearing and race is the # 387A and # 382A, the correct outer bearing and race is the # 25580 and # 25520. For a replacement seal you want the # 10-51.
For electric brakes I recommend the Dexter Electric Trailer Brake Kit - Self-Adjusting - 12-1/4" - Left/Right Hand Assemblies - 10K # 23-438-439. These are self-adjusting brakes so there will be no need for manual adjustment.
I have attached...
view full answer... - Recommended Toy Hauler Door Screen For A 2021 Forest River Rogue Vengeance Toy Hauler
- For your 2021 Forest River Rogue Vengeance Toy Hauler with a 97.5" door width I recommend the LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 96-5/8" Wide # 3441409662PBK. The side rails of this screen will easily make up the 1" distance to fit your door opening.
view full answer... - Rail Spacing Needed When Installing The B&W Custom Installation Kit w/ Base Rails # BWRVK2401
- The distance between the rails should be center to center 22" (pictured below). This rail spacing is considered industry standard. I've attached the installation video for the custom fit B&W rails # BWRVK2401 to help you with the installation so that you can have them ready to go for when your B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000lbs # BWRVK3270 arrives.
view full answer... - Front Hitch For 2011-2016 Ford F-250 That Does Not Extend Past Front of Truck
- While we have an option for you, from the photos I've seen, the EcoHitch Hidden Front Mount Trailer Hitch Receiver # EH59FR looks to extend ever so slightly past the tow hooks. So what I recommend instead for your F-250 is a front hitch from Draw-Tite:
- Draw-Tite Front Mount Trailer Hitch Receiver # 65049
I have added a photo for you below of the Draw-Tite # 65049 installed on an F-250 so you can see that it does not protrude past the front of the truck whatsoever.
Since you mentioned...
view full answer... - Fifth Wheel Hitch Recommendation for 2019 Ford F-250 with Demco Rail Kit Installed
- The Demco 5th Wheel Installation Kit # DM8552031-71. you referenced provides a set of industry standard fifth wheel rails so you have many hitch options that will fit. Since your 2019 Ford F-250 is a short bed you would need a slider hitch to allow you to have the needed turning clearance.
So for that I highly recommend the Demco Hijacker AutoSlide hitch part # DM8550034 as it slides automatically as you make tight turns to provide you with the turning clearance you need. Most slider hitches...
view full answer... - Best Option for Foot Pad for Lippert Level Up
- Lippert does not make the specific foot pad for the Level Up system a replacement part, so the best option for a replacement is the Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667.
Please keep in mind this may require you to source a different size bolt in order to fit the Level Up.
view full answer... - Best Suspension Enhancement for 2019 Ford F-250 Towing Fifth Wheel
- I like to recommend air spring setups as they offer you the ability to have the exact amount of suspension support you need at any given moment. The Timbren type setups are great but it's more or less a "one size fits all" scenario and we've heard several people tell us the ride quality gets harsh. With air bag setups you can pump the bags up and have all the support you'd need (too much will be harsh) but then when not towing you can air them down to 5 psi and you have a totally unaffected...
view full answer... - Sidewinder That Will Replace Lippert 1116 Pin Box on Fuzion Toy Hauler
- Thanks for that information and based on that I can tell you exactly what you need. I reached out to Lippert with your pin box serial number and they told me that your 2015 Keystone Fuzion 325 pin box is a Lippert 1116 model.
The correct replacement for a Lippert 1116 is the Sidewinder # RP77FR.
You have made a really good choice because this pin box is going to give you the comfort of never having to use a sliding hitch.
view full answer... - Will Adding Chains to Titan HItch Box Extension Make it a Weight Distribution System
- The chains you typically see with the Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018 are safety chains. Although it is compatible with a weight distribution hitch, this is nothing more than an extension of the hitch on the back of your vehicle.
If you plan on using a WDH you want to choose one based on your loaded tongue weight. For example, the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW # EQ37100ET would...
view full answer... - Recommended Weight Distribution System for 2022 Timber Ridge 24RKS Travel Trailer
- Thank you for providing that information. It sounds like you are getting the Timber Ridge 24RKS Mountain Series with a dry weight of 6,600 lbs and GVWR of 9,995 lbs. Since the batteries and propane push you into the 800-1,200 lb tongue weight range of the # EQ37120ET I believe this will work. If you were to go over the 1,200 lb max for this WDH it would no longer be effective.
The only way to be absolutely sure is to weigh your fully loaded trailer. You can use a scale like the # e99044....
view full answer... - Do Air Bags Increase Towing Capacity on a 2020 Ford F-250?
- I would be happy to help you. The Air Lift LoadLifter 5000 Air Helper Springs item # AL23FJ you were looking at are confirmed to fit your 2020 Ford F-250 Super Duty. They will reduce the strain on your rear suspension, increase safety, and compensate for uneven loads but they will not increase your truck or hitches towing capacity. I have linked an installation video below.
I also recommend the Air Lift WirelessAIR Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount...
view full answer... - Timbren Silent Ride System for 2017 Stealth Forest River Toy Hauler FQ2817G
- For your 2017 Stealth Forest River Toy Hauler that has a GVWR of 12,100 lbs the best Timbren Silent Ride would be the part # TSR14KT01 which has a capacity of 14,000 lbs. This will put the axles of your trailer 6-1/8 inches from the frame which you can compare to your current height to see if this would raise or lower the height.
view full answer... - Does the TorkLift StableLoad Suspension Upgrade Require Drilling On a 2020 Ford F-250
- The TorkLift StableLoad Suspension Upgrade w Quick-Disconnect part # TLA7310S which are a fit for a 2020 Ford F-250 Super Duty would require drilling if you didn't have any pre-drilled holes on the lower overload springs which appears to be the case. I'd suggest the Air Lift LoadLifter 5000 Air Helper Springs part # AL76KV for a no-drill option which gives you much more control.
view full answer...
Go To Results